Physics, Science, Mathematics, Absolute value, Variables, Function, Graph, Inverse function, Trigonometric Function, Simultaneous equations, Linear equation, Units, Standard, International System of Units (SI), Significant figures, Scientific notation
.
GLOSSARY
For details on the following concepts, please consult CHAPTER 1.
PHYSICS Origin: “pertaining to nature.” Physics is the science that deals with matter, energy, motion, and force.
SCIENCE Origin: “to know.” Science is systematic knowledge of the physical or material world gained through observation and experimentation.
MATHEMATICS Origin: “something learned.” Mathematics is the systematic treatment of magnitude, relationships between figures and forms, and relations between quantities expressed symbolically.
ABSOLUTE VALUE The value without regards to its sign. It is the magnitude of a number.
VARIABLES Variables are quantities that can take on a range of values.
FUNCTION Origin: “performed, executed.” A function is a mathematical relationship between two variables. If one of the variables takes on a particular value, the relationship tells us the corresponding value of the other variable.
GRAPH Whenever one has a mathematical relationship between two variables, one can represent the function by a two dimensional graph. Note: Look up the definitions of the following on page 3: axes, origin, independent variable, dependent variable, slope, intercept.
INVERSE FUNCTION A function gives us a y value for every x value. Inverse function turns it around and gives us an x value for every y-value. To get the graph of inverse function, rotate the graph of the function 90 deg clockwise so that y appears along the horizontal.
TRIGONOMETRIC FUNCTION Trigonometric Functions are most usually defined in terms of ratios of sides of a right triangle, in which the angle plays the role of the independent variable.
SIMULTANEOUS EQUATIONS When we have two different relationships involving the same two variables, then both relationships can be valid only for specific values of the variables.
LINEAR EQUATION Such equation are represented by straight lines on a graph.
UNITS Origin: “unity.” Unit is an identity element. We need units of measurement to measure physical quantities, such as, length, area, volume, velocity, acceleration, mass, time and temperature. Not all measurable quantities require their own units. Often, the unit is automatically defined in terms of other units. Such units are called derived units. In the subject of mechanics, only three physical quantities must have their units defined independently. These three quantities are usually taken to be length, mass and time, and their units are called fundamental units. It turns out that units can be treated algebraically in any physics equation.
STANDARD The physical specimen, which defines the unit, is called the standard.
INTERNATIONAL SYSTEM OF UNITS (SI) The set of units most commonly used throughout the world, and which is almost exclusively used in scientific work. In mechanics, the units are the meter, the kilogram, and the second, and are what is commonly called the mks system.
SIGNIFICANT FIGURES Whenever a measured value is given for a physical quantity, it can only be an approximation, because it is not possible to measure anything with “infinite” accuracy. A scientist or engineer who specifies the numerical value of a physical quantity keeps only as many figures in the number as are justified by the accuracy to which the physical quantity is known. For any measured quantity there is always some uncertainty in the last digit given. The number of significant figures provide a rough measure of percent uncertainty.
SCIENTIFIC NOTATION Scientific notation is a method for expressing a given quantity as a number having significant digits necessary for a specified degree of accuracy, multiplied by 10 to the appropriate power, as 1385.62 written as 1.386 × 103.
It is also intuitively immediately apparent that without a stress tensor for the static gravitational field, the Newtonian forces cannot be derived from an energy tensor. Also, if the energy-momentum conservation concept is not applied to the metric field, it loses all physical value.
Einstein to M. Besso, August 1918
In other words, if the gravitational field is there, then the energy in that field has to be in a state of stress. That is the basis of Newtonian forces. The energy represents physical substance that is in motion. This property is defined by the energy-momentum conservation concept.
.
From the earliest recorded thoughts about physics and philosophy, beginning in ancient times, theories about the constitution of nature have been divided into two opposing conceptual frameworks, one based on the idea of a continuum of substance permeating all space, and the other based on the idea of isolated entities moving through a void of empty space. (See Continuity and the Void).
The void of empty space is difficult to conceive because space, by definition, represents the extents of substance. Empty space, therefore, must consist of invisible substance that has very small consistency (thickness). This substance is energy (mass) of very low quantization. I, therefore, subscribe to the first conceptual framework.
From matter to space, energy is continually diminishing in its consistency. Faraday described it as “lines of force” that were concentrated in atoms, and which spread out in space. Matter does not end abruptly and space starts. However, Newton’s mechanics uses this latter framework from which comes the idea of action at a distance.
Although one view or the other has sometimes been predominant, neither view has ever won unanimous assent, and the “mainstream” view has alternated back and forth between the two frameworks many times throughout the history of science. At the beginning of the scientific revolution, Descartes adopted the philosophy of the continuum, insisting that space and matter are co-extant (indeed, that they are the same thing), so there is no such thing as empty space, and he asserted that objects affect each other only by direct contact. However, the swirling vortices of Descartes were soon discredited by Newton’s theories of dynamics and gravitation. Newton himself was equivocal, but his theories strongly tended to support the idea of isolated particles of matter moving in an empty void, capable of interacting with each other, via the force of gravity, over great distances.
The “continuum of substance” framework gives us a spectrum of a physical substance of varying consistency from space to matter. Matter is the most condensed form of this substance, and space is the least condensed form. We may call this substance energy. The primary characteristic of this substance is force. This was Faraday’s view. The swirling vortices of Descartes may be used as a model for an atom with energy condensing towards the center.
The framework of “isolated entities moving through a void of empty space” is used in Newtonian mechanics. It is a very simplified binary view of the former framework, consisting only of matter and space. Here space is seen as a void (absence of matter). This simplification then provides us with the various concepts of distance, velocity, acceleration, mass, force, and energy of Newtonian mechanics. It defines the force of gravity as action at a distance.
The early theories of electricity and magnetism developed by Coulomb, Ampere, and Oersted, were based on the Newtonian model of gravity, which is to say, they were based on the premise that isolated objects moving in the void of empty space exert forces on each other even when separated by some distance (rather than just when they are in direct contact). This theoretical approach proved very successful, and was developed to a high level, culminating in the work of Weber, Neumann, and others by around 1849. However, simultaneously with those developments, Faraday was investigating the same phenomena of electromagnetism from a completely different perspective, reverting to the idea of contact forces exerted through some kind of substance permeating all of space.
On a macroscopic scale, the Newtonian mechanics, with its theory of “action at a distance” has been rather successful. It has been able to explain the motion of the planets. This theory of force is used successfully even in the explanation of electromagnetic phenomenon. Faraday, however, used the continuum of substance perspective in investigating the electromagnetic phenomenon. His experiments led him to the concept of field consisting of lines of forces. Faraday’s approach takes Newton’s concept of inertia to the level of “innate force of substance” pervading all space.
This approach was taken up by Maxwell, who in 1855 published a paper, “On Faraday’s Lines of Force”, in which he sought to express Faraday’s ideas in mathematical form. Maxwell continued his investigations in a paper entitled “On Physical Lines of Force”, published in 1861, and then another, entitled “A Dynamical Theory of the Electrodynamic Field” in 1864. This work ultimately led to his great and highly influential “Treatise on Electricity and Magnetism”, published in 1875, which is the basis for most treatments of the classical theory of electromagnetism to this day.
Maxwell sought to express Faraday’s ideas of lines of force in mathematical form. But the mathematics used by Maxwell maintained the identity of substance rigidly separate from space as per Newtonian mechanics. Maxwell’s mathematical lines of force did spread out and came together in space, but they did so as an incompressible fluid, and not as a substance thinning out or thickening up on a gradient. The Maxwell’s field is, therefore, based on the “action at a distance” theory of Newton, and not on Faraday’s “continuum of substance” approach.
Nevertheless, the tradition of Weber, et al, has continued, notably with the work of Lorenz, the retarded potentials of Lenard and Weichert, and the absorber theory of Wheeler and Feynman. It is generally conceded today that electrodynamics can be formulated either as a field theory or as a distant-action theory, although one may be more convenient than the other in any given circumstance. This ambiguity arises because, even in field theories, we never actually observe a field, we only observe the behavior of material entities. Based on this behavior, we find it convenient to hypothesize the existence of certain fields, partly as a computational aid, i.e., a simple way of encoding the rules that evidently govern the behavior of material entities. But it is also possible to formulate those laws without reference to any hypothetical fields in empty space, by allowing for distant action, provided we allow the forces to be retarded functions of the relative motions of particles (not just their relative positions).
The current field concepts are a simple way of encoding the rules that evidently govern the behavior of material entities. A retarded function encodes how a disturbance at one point and time produces a causal response at later times. This allows for “action at a distance”.
Maxwell was well aware of the viability of this “fieldless” approach, but was not satisfied with it. He wrote in his 1864 paper
This theory, as developed by W. Weber and C. Neumann, is exceedingly ingenious, and wonderfully comprehensive in its application to the phenomena … The mechanical difficulties, however, which are involved in the assumption of particles acting at a distance with forces which depend on their velocities are such as to prevent me from considering this theory as an ultimate one…
Ironically, the reason given here by Maxwell for being dissatisfied with the distant-action approach to electromagnetism was actually based on a misunderstanding, as Maxwell later acknowledged. He originally thought a velocity-dependent force law must automatically violate the conservation of energy. Indeed, the first such law to be proposed (by Gauss) was subject to this objection. However, the force law of Weber fully satisfies the conservation of energy, so Maxwell’s original stated motivation was unfounded. After realizing this, he amended his reasons for opposing distant action theories. In later treatments he emphasized the requirement (as he saw it) for the electromagnetic energy (and momentum) emitted by one body and absorbed some time later by another body to have some mode of existence between the emission and absorption events. Thus, his mature rationale for fields was that they provide the vehicle for spatially and temporally continuous conservation of energy and momentum during the intervals of communication–which he showed were non-zero, because of the finite speed of propagation of electromagnetic disturbances. Others have considered the sheer simplicity and clarity of the field formulation to be the strongest evidence for the “reality” of the fields. For example, this seems to have been Einstein’s view.
Maxwell’s rationale for fields was that they provide the vehicle for spatially and temporally continuous conservation of energy and momentum during the intervals of communication.Thus, he viewed the field to exist separate from space same as matter. The field was not integrated with space the way Faraday’s lines of force were. Thus, the field is treated in the mechanical sense given by Newton in terms of momentum and energy.
In any case, Maxwell’s understanding of the electrical force that exists between charged particles was based on the idea that even the “empty space” of the vacuum is actually permeated with some kind of substance, called the ether, which consists of individual parts that can act as dielectrics.
The theory I propose may therefore be called a theory of the Electromagnetic Field, because it has to do with the space in the neighbourhood of the electric or magnetic bodies, and it may be called a Dynamical Theory, because it assumes that in that space there is matter in motion, by which the observed electromagnetic phenomena are produced.
Maxwell idea of field is “Space is permeated with a substance called ether.” This is different from field as visualized by Faraday,“Space itself is substance with inherent characteristic of force.” In other words, space was continuous with matter for Faraday, but not for Maxwell.
The simplest component of this theory was the electrostatic field, which Maxwell envisaged as a displacement of the dielectric components at each point in the medium. In simple terms, he pictured ordinary empty space, when devoid of any electric field, as consisting of many small pairs of positive and negative charge elements, and in the absence of an electric field the two opposite charges in each pair are essentially co-located, so there is no net change or electric potential observable at any point. If an electric potential is established across some region of this medium (e.g., empty space), it tends to pull the components of each pair apart slightly. Maxwell termed this an electric displacement in the medium. Of course, the constituent parts of the dielectric pairs attract each other, so the electric displacement is somewhat like stretching a little spring at each point in space.
Dia- in dielectric means “across.” In Maxwell’s conception, an electrostatic field was a polarized “space.” It was as if the “space” was stretched. The “space” appears to be the idealization of the interface between the nucleus and the electronic layer of the atom. Or, it could be seen as the stretching of an atom without its nucleus.
As an aside, it’s interesting that this theory, which supposedly denies the intelligibility of distant action, nevertheless ends up invoking (albeit on a very small scale) what appears to be elementary attraction between distinct and separate entities. It’s clear that Maxwell recognized this aspect of his theory when he wrote
I have therefore preferred to seek an explanation of the facts … without assuming the existence of forces capable of acting directly at sensible distances.
The qualifier “sensible” is obviously intended to side-step the fact that his “explanation of the facts” does still assume the existence of forces capable of acting at a distance, but he excuses this on the grounds that it is not a “sensible” distance. This can certainly be criticized, since if the objection to action at a distance is based on principle, then it isn’t clear why it should be considered more acceptable over short distances than over long distances. Ironically, Maxwell himself even commented on this critically in an article on Attraction written for the 9th edition of the Encyclopedia Britannica in 1875.
If, in order to get rid of the idea of action at a distance, we imagine a material medium through which the action is transmitted, all that we have done is to substitute for a single action at a great distance a series of actions at smaller distances between the parts of the medium, so that we cannot even thus get rid of action at a distance.
and elsewhere he said even more pointedly
…it is in questionable scientific taste, after using atoms so freely to get rid of forces acting at sensible distances, to make the whole function of the atoms an action at insensible distances.
Maxwell didn’t have the right mathematical model to represent Faraday’s ideas correctly. He simply dispersed the Newtonian “matter” over larger space without using the insight of Faraday that force means the presence of substance, and space simply represents the extents of this substance.
Despite these scruples, Maxwell’s theory of electrodynamics, based on forces acting over insensible distances, proved to be tremendously successful. The elaborate and complicated material mechanisms that Maxwell originally conceived to embody the mathematical relations of the field eventually receded in his thinking, as he came to focus more and more on purely abstract energy-based considerations.
We may express the fact that there is attraction between the two bodies by saying that the energy of the system consisting of the two bodies increases when their distance increases. The question, therefore, Why do the two bodies attract each other? may be expressed in a different form. Why does the energy of the system increase when the distance increases?
If the substance is continuous, then increase of distance represents thinning of substance (force) and increasing of motion (velocity). Amount of substance remains the same, but energy increases because work is done to push the two particles apart.
It’s easy to see that Maxwell’s conception of the electric field is quite consistent with this energy-based approach. First, recall that, according to standard electromagnetic theory, the energy density of an electric field in vacuum is (1/2)ε0E2, where E is the magnitude of the electric field at the given point and ε0 is the permittivity of the vacuum. (For the spherical field around a stationary mass point, E drops off as the square of the distance, so the energy density drops off as the fourth power, so the total integrated energy is finite.) Now consider two particles with equal and opposite electric charges, and suppose they are initially co-located at a single position. Their electric fields cancel out, because the union of these oppositely charged particles is an electrically neutral particle. As a result, the dielectric medium surrounding these two particles is “un-stressed”, i.e., none of the tiny springs are displaced at all, so no energy is stored in those springs. Now suppose we separate the two oppositely charged particles by some distance. This displacement results in a net electric field in the surrounding medium. Much of the two fields still cancel out, but not all, so the dielectric elements are displaced, the “springs” are stretched slightly, and the medium now holds some energy. The energy came from the work done to separate the particles, so we see that these two oppositely charged particles exert a force of attraction on each other (through the intermediary of the dielectric medium). The further we separate the particles, the more energy we put into the field, and we approach the energy of two complete isolated fields when the particles are infinitely far apart.
The universal substance is gradient of mass. Charge exists with sudden change in gradient. An electric field exists at the interface between the nucleus and the surrounding electronic layer. Here the substance is stretched suddenly. The magnitude of electric field (E) is the degree of stretch. Energy density is how much energy exists at a location in the stretched space. It is proportional to E2. The constant of proportionality is half of the “permittivity of the vacuum.”
Positive charge is balanced by negative charge elsewhere. Therefore, the net charge is always zero. A single isolated charge has a spherical field around it. The inherent force and consistency of this field drops off rapidly with distance, so the total energy associated with that charge is finite.
For two equal and opposite charges, all lines of force start from one charge and terminate into the other. The lines do not exist when the charges are co-located. There is no charge, field or space. We are not considering the mass and material space in this situation. Separating of these two charges would mean supplying additional forceto create the two charges and the distance between them. Ultimately, we approach the force that forms two isolated charges infinitely far apart. This force must have come from a virtual dimension.
The other case to consider is two particles with the same electric charges, both positive or both negative. Again we start with the two particles co-located, but in this case the fields do not cancel each other, they combine to produce a spherical field of twice the strength (and hence four times the energy) of a single charged particle. Thus the surrounding dielectric medium is already significantly “displaced”, and it contains energy in all those stretched “springs”. If we now separate the two particles by some distance, some cancellation of the fields is introduced (most notably in the region between them, where the fields point in opposite directions), and the fields are less additive in other regions. As a result, the stress and displacement of the dielectric medium is reduced, as is the amount of energy stored in the field. The released energy as the particles move further apart corresponds to a force of repulsion between the two positively (or two negatively) charged particles. The further apart we move the particles, the more energy is removed from the field, and we again approach the energy of the fields of two individual isolated particles. (This is less than the energy of the original single field with twice the strength, because the energy is proportional to the square of the field strength.)
A double charge at a single location would naturally try to spread out to attain equilibrium, and that is why two similar charges repel each other. A single charge cannot spread out further because of its quantum nature (possibly being an energy vortex).
Two equal and opposite charges separated by a distance, and maintained as an isolated system, will not annihilate each other as long as the total force of that isolated system is conserved. Instead, they will start circling around each other. This is the situation within an atom. The force must leak back to the virtual dimension for opposite charges to come together and annihilate each other.
Toward the end of his 1964 paper, Maxwell inserted a brief note regarding the force of gravitation. He had commented previously on the formal similarities between the electric, magnetic, and gravitational fields, but now, after describing his energy-based model for the electric (and magnetic) forces between charges, he faced an obvious difficulty when trying to account for the force of gravity in a similar way.
Gravitation differs from magnetism and electricity in this; that the bodies concerned are all of the same kind, instead of being of opposite signs, like magnetic poles and electrified bodies, and that the force between these bodies is an attraction and not a repulsion, as is the case between like electric and magnetic bodies.
In gravitation, there is an equilibrium of movement as among the bodies of the solar system. The moon revolves around the earth on a path determined by this equilibrium. The objects on earth also want to revolve around the earth, but their equilibrium path is less than the radius of the earth. So, they are pushed against the earth. This is not like the attraction between two opposite charges. It is actually a movement that is restrained, which gives us our weight.
To be more explicit, suppose we regard the force of gravitation as arising from the actions of a field, and suppose the presence of a gravitational field represents a certain energy content. The stronger the field, the more energy it contains. Now if analyze a pair of massive particles, we find that when they are initially co-located, we have a field with twice the intensity of the field of either particle individually, and as we move the particles apart, the integral of the squared field strength (i.e., the total energy content of the field) drops, just as in the case of the electric field of two positively charged particles. Since the energy of the combined gravitational field drops as the particles are moved apart, it follows (by Maxwell’s reasoning) that there is a force of repulsion, not attraction, between the particles. The force of gravity predicted by this simple energy-based reasoning is in the wrong direction. Indeed this reasoning implies that it is impossible for “like” charges to attract each other – at least if their interaction can be represented as a continuous field.
The reasoning applied to electromagnetic field does not apply to the gravitational field. Gravity is a very different phenomenon as explained in the comment above.
The only possibility that Maxwell could see for salvaging the field-based approach to gravity was if we suppose that a massive body contributes negatively to the energy of the gravitational field in its vicinity. It would then be the most negative when the two particles are co-located, and become somewhat less negative as they are moved apart. Since the change in energy as the particles are moved apart would be positive, so this would represent a force of attraction. However, Maxwell was not prepared to contemplate negative energy (notice that, since energy is proportional to the square of the field strength, a negative energy would imply an imaginary field strength), so he suggested that we could postulate a huge positive background energy content for empty space, and then we could suppose that the presence of matter somehow diminishes the energy of this background field in its vicinity. To ensure that the total energy density of the field at any point is never negative, he said the background field stress would need to be at least as great as that of the strongest gravitational field anywhere in the universe. (He apparently ruled out the possibility of point-like masses, which would require the background stress to be infinite.)
The assumption, therefore, that gravitation arises from the action of the surrounding medium in the way pointed out, leads to the conclusion that every part of this medium possesses, when undisturbed, an enormous intrinsic energy, and that the presence of dense bodies influences the medium so as to diminish this energy wherever there is a resultant attraction. As I am unable to understand in what way a medium can possess such properties, I cannot go any further in this direction in searching for the cause of gravitation.
Gravitational field is actually the field of thickness (mass). Maxwell’s energy-based model failed to apply to gravitation because the concept of mass is very different from the concept of charge.
This problem helps to explain why it took longer to devise a viable field theory for gravitation than it did for electromagnetism. Of course, in a sense, a field theory for gravity already existed in the form of the classical scalar potential, which satisfies the (Poisson) field equation
in suitable units, where φ is the potential energy and ρ is the mass density. This equation is identically satisfied by setting φ (r) = k/r + C for any constants k and C, positive or negative, but in order for the φ field to give an attractive force, we must set k to a negative value. This is entirely consistent with Maxwell’s comments, i.e., the potential gravitational energy associated with a configuration of mass particles must decrease as the particles are brought closer together. The only way in this classical context to avoid actual negative energy (which Maxwell deemed necessary) is to set the “background” constant C to a value greater than the largest magnitude of k/r anywhere in the universe. In pre-relativistic physics, people worked with Poisson’s equation without worrying about the meaning of negative energy, they simply set C = 0, accepting the (apparent) fact that gravitational potential energy is negative. This “works” fine for most applications, but it doesn’t satisfy Maxwell’s desire to form an intelligible conception of the gravitational field in terms of ordinary classical dynamics.
In classical dynamics inertia is limited to matter only, and it does not extend to space. Therefore it requires the unusual assumption of the “background void” having an enormous intrinsic energy in order to avoid negative energy. This shows the weakness of distant-action theory of Newtonian mechanics.
Remarkably, the expression corresponding to the “potential” in the weak field limit of general relativity actually does correspond to something like what Maxwell suggested. The effective classical “potential” for a spherically symmetrical field surrounding a mass M in the weak field limit is (half of) the time-time component of the metric tensor
where G is Newton’s gravitational constant and c is the speed of light. The classical pre-relativistic expression for gravitational potential energy per unit mass is -GM/r, so a test particle of mass m is assigned the potential energy -GMm/r. Re-writing gtt in a form that isolates this expression, we have
Thus when Maxwell said that the gravitational medium must possess enormous intrinsic energy, and the leading constant term must (to avoid negative energy) equal “the greatest possible value of the intensity of gravitating force in any part of the universe”, he could have been (as we see in retrospect) referring to the field intensity at the Schwarzschild radius of a black hole, where the gravitational “potential” is comparable to the intrinsic “rest” energy of a test particle. In a sense, the enormous background energy corresponds to the “rest” energy E = mc2 of the test particle, which in turn corresponds to the ratio of proper time to some suitable coordinate time at any location in the field. Of course, there need not always be a “suitable” coordinate time, and hence energy cannot always be unambiguously localized in general relativity. However, in special circumstances such as a spherically symmetric field going to flat Minkowski spacetime at infinity, we have a fairly unambiguous definition of energy.
This unusual assumption, “the gravitational medium must possess enormous intrinsic energy to avoid negative energy,” also appears in the general theory of relativity. This could be the energy in the virtual dimension referred to above.
As an aside, the attractive nature of gravity is sometimes said to be closely related to (if not a direct consequence of) the equivalence principle, according to which the gravitational “charge” m of a given body is identical to the inertia of that body. In the case of electricity, reversing the sign of a particle’s electrical charge will reverse the direction of the applied force, but not of its inertia, so the resulting acceleration is reversed. In contrast, reversing the sign of the mass of a body would not only reverse the direction of the force, it would also reverse the direction of the resulting acceleration relative to the force, so the acceleration would be in the same direction, regardless of the sign of the mass. On the other hand, it could be argued that the gravitational interaction between two “like” particles involves three applications of the sign of mass: The mass producing the field (active charge), the mass responding to the field (passive charge), and the inertial mass of the responding particle. On this basis, reversing the sign of mass would reverse the direction of acceleration. This kind of superficial algebraic conundrum highlights the importance of energy-based reasoning.
The equivalence principle is a basic postulate of general relativity, stating that at any point of space-time the effects of a gravitational field cannot be experimentally distinguished from those due to an accelerated frame of reference.This principle is consistent with Faraday’s conceptualization of force (substance or inertia) and its gradient. The electromagnetic spectrum demonstrates this gradient of force of which neither Newton nor Maxwell was aware. Though Einstein came up with the equivalence principle, he also ignored the gradient of force as gradient of inertia or substance.
The error comes from Newton’s treatment of substance as either there (matter) or not there (space), and no gradient in between. This black and white assumption appears in the consideration of inertia (force) with respect to mass only and not with respect to the electromagnetic substance. From this assumption comes the energy-based approach.The moment we expand this “black and white” mathematical approach of Newton by the “gradient of force-substance” approach of Faraday, we see a host of new solutions to appear.
In his encyclopedia article on “Attraction” Maxwell did suggest one possible representation of the gravitational force in terms of a dynamical field that he hadn’t mentioned in 1864. After explaining how forces (such as electricity and magnetism) that are repulsive between “like” bodies may be represented in terms of a medium in a state of stress “consisting of tension along the lines of force and pressure in all directions at right angles to the lines of force”, he turns again to the vexing problem of gravity.
To account for such a force [of attraction between like bodies] by means of stress in an intervening medium, on the plan adopted for electric and magnetic forces, we must assume a stress of an opposite kind from that already mentioned. We must suppose that there is a pressure in the direction of the lines of force, combined with a tension in all directions at right angles to the lines of force. Such a state of stress would, no doubt, account for the observed effects of gravitation. We have not, however, been able hitherto to imagine any physical cause for such a state of stress.
In electricity and magnetism the forces of attraction and repulsion are there to bring the local gradients of force into equilibrium. If there is a gap in the gradient then the force is one of attraction. If there is overlapping gradient, the force is one of repulsion. Once the gradient is established, there are no electric and magnetic forces. These are local forces only in the gamma range.
When the local gradient of forces is established, the wider equilibrium of gradient (in terms of inertial force over the whole electromagnetic spectrum) still needs to be established among mass objects. The gravitational force of attraction exists because there are gaps in gradients of inertial force between two mass objects.
This is interesting because his theory of electromagnetism is normally regarded as a vector field (corresponding to a spin-1 mediated force), and all such fields are known to yield repulsion for “like” charges, and yet Maxwell seems to be saying that he can conceive of an attractive force “on the [same] plan”, merely by exchanging tension and compression. On the other hand, his specification of both tension and compression in various directions at each point within the medium is more suggestive of a tensor field (i.e., a spin-2 mediated force) rather than a vector field. The usual textbook explanation is that even-order fields (e.g., scalars and tensors) are attractive for like particles, whereas odd-order field (e.g., vectors) are repulsive for like particles, all under the assumption of strict positivity of energy. This shows how prescient was Maxwell in imposing this requirement on his field theories.
The force of repulsion between “like charges” is due to overlapping gradient of force. The repulsion is there to realign two similar gradients that belong to different sections on the overall gradient. See Comments on Electric Charge.
Maxwell ignores the gradient characteristic of energy-substance, and assumes that energy-substance has same characteristic throughout. This ignorance is then justified through complex mathematics.
However, there is one other important premise underlying the modern textbook answer, namely, that we are working in a relativistic context. We’ve already seen that the classical non-relativistic scalar field representation of gravity implies an attractive force only if we assume that the field energy is reduced when masses are brought together, and yet the magnitude of the field strength clearly increases in such circumstances, just as when two identical electric charges are brought together. So, the modern textbook explanation today is that the total mass-energy of a system is indeed reduced when the matter components are in closer proximity, just as Maxwell surmised. Furthermore, the total overall mass-energy of any system, including the “negative” contribution of gravitational potential energy, is always positive, which again is just as Maxwell surmised, when he suggested the existence of a very large “background” energy that is diminished when objects are close together. Of course, this is the very thing that Maxwell said he could not understand. It is perhaps slightly misleading to say the gravitational potential energy is negative. It might be better to say the absence of gravitational potential represents positive energy, except that even in the case of gravitation the energy of the field is said to be proportional to the square of the field strength, which (as noted above) would seem to imply imaginary field strength in order to give negative energy. In view of all this, is it fair to say that we’ve satisfactorily answered the question Maxwell was unable to answer – or have we simply decided to disregard it? Are we any more able than Maxwell to conceive of how bringing two objects together, increasing the magnitude of the field strength, whose square corresponds to field energy, results in a decrease of energy? Are there any alternative conceptual frameworks within which Maxwell’s question could be answered in a more satisfactory way? Part of his difficulty may be attributed to the fact that he didn’t have a unified concept of energy-momentum, but more fundamentally it could be argued that Maxwell couldn’t explain gravity because he didn’t know that the signature of the spacetime metric is negative.
The relativistic context seems to approach the continuum of substance framework rather than the distant-action framework of Newtonian mechanics. Time and distance, hence velocity, seems to relate directly to the consistency of energy-substance. This consistency is increasing on a continuous gradient from space to matter. This gradient is increasing relatively slowly up to the visible spectrum of light, but then it really accelerates beyond X-rays into the quantum area. When two masses are brought together the consistency of energy-substance increases at a high gradient. If the gradient continues to increase we approach the black hole phenomenon.
When two identical electric charges are brought together, we have increase not in the consistency of energy-substance, but in the distortion imposed on that energy-substance. The distortion attempts to reverse itself in the real dimension to attain equilibrium. But the consistency of energy-substance seems to reverse itself in some virtual dimension. The energy-based system confined to the real dimension cannot address this.
The effect of the negative signature of the spacetime metric is discussed in the note on Path Lengths and Coordinates, and more specifically as it relates to the attractiveness of gravity in the note entitled Accelerating in Place. The latter note explains in detail why, if the signature of the spacetime metric was positive, we would indeed expect gravity (for positive mass-energy) to be a repulsive force. The negative signature implies that geodesic worldlines of material particles actually maximize (rather than minimize) its absolute path length. The sign of the accelerations in the geodesic equations depends on the sign of the metric signature, i.e., on whether the time coefficient has the same or opposite sign as the space coefficients. An even more explicit demonstration of this is presented in the discussion of the Newtonian limit of general relativity in Scholium. There it is shown that the direction of gravitational acceleration is determined by the sign of M/k where M is the mass of the gravitating body and k is the signature of the spacetime metric. If we assume a Euclidean, positive definite, spacetime metric, then k = 1 and the only way for gravity to be attractive is with negative mass-energy. Conversely, with a Minkowski metric we have k = -1, so attractive gravity corresponds to strictly positive mass-energy. (See also the note on Potential Energy, Inertia, and Quantum Coherence for thoughts on the energy implications of falling objects in different contexts, and how the energy is transported away.)
We have lot of mathematics here.
It would be interesting to know if Maxwell’s reversal of stresses can be seen as corresponding to a negation of the signature of spacetime. Related to this is the question of how he derived the value of 37,000 tons per square inch for the pressure (and perpendicular tension) that would be required at the Earth’s surface to reproduce the effects of gravity.
It seems that we require out of the box thinking to explain gravity; and that would involve moving away from distant-action framework and toward the continuum of substance framework.
Einstein’s theory of relativity works for cosmological dimensions, but not when it comes to atomic dimensions. Einstein was critical of the quantum mechanics having no coherent theory, while he could not come up with a physical theory to explain quantum effects. This bothered him for the rest of his life.
Here is an examination of Einstein’s postulates that led to his original paper on relativity. This 1905 paper of Einstein is available at the following link.
Parts of this paper are quoted below that show Einstein’s non-mathematical reasoning. Einstein’s statements are in black italics. My understanding follows in bold color italics.
.
Basic Postulates
It is known that Maxwell’s electrodynamics—as usually understood at the present time—when applied to moving bodies, leads to asymmetries which do not appear to be inherent in the phenomena. Take, for example, the reciprocal electrodynamic action of a magnet and a conductor. The observable phenomenon here depends only on the relative motion of the conductor and the magnet, whereas the customary view draws a sharp distinction between the two cases in which either the one or the other of these bodies is in motion. For if the magnet is in motion and the conductor at rest, there arises in the neighbourhood of the magnet an electric field with a certain definite energy, producing a current at the places where parts of the conductor are situated. But if the magnet is stationary and the conductor in motion, no electric field arises in the neighbourhood of the magnet. In the conductor, however, we find an electromotive force, to which in itself there is no corresponding energy, but which gives rise—assuming equality of relative motion in the two cases discussed—to electric currents of the same path and intensity as those produced by the electric forces in the former case.
This introductory paragraph from the paper mentions asymmetry observed in the relative motion between a magnet and a conductor. This asymmetry occurs in the customary view, which uses the lab as its frame of reference. This results in different interpretation of the same phenomenon.
This “asymmetry” disappears when we use the magnetic lines of force, which are attached to the magnet, as the frame of reference. The conductor moves relative to these lines of force the same way in either case producing the same result. So, the problem has to do with how the frame of reference is selected.
Examples of this sort, together with the unsuccessful attempts to discover any motion of the earth relatively to the “light medium,” suggest that the phenomena of electrodynamics as well as of mechanics possess no properties corresponding to the idea of absolute rest. They suggest rather that, as has already been shown to the first order of small quantities, the same laws of electrodynamics and optics will be valid for all frames of reference for which the equations of mechanics hold good. We will raise this conjecture (the purport of which will hereafter be called the “Principle of Relativity”) to the status of a postulate, and also introduce another postulate, which is only apparently irreconcilable with the former, namely, that light is always propagated in empty space with a definite velocity c which is independent of the state of motion of the emitting body. These two postulates suffice for the attainment of a simple and consistent theory of the electrodynamics of moving bodies based on Maxwell’s theory for stationary bodies. The introduction of a “luminiferous ether” will prove to be superfluous inasmuch as the view here to be developed will not require an “absolutely stationary space” provided with special properties, nor assign a velocity-vector to a point of the empty space in which electromagnetic processes take place.
The Michelson-Morley’s experiment was very precise but it failed to discover any motion of earth relative to the light medium. That was because the inertia of light is imperceptibly small compared to the inertia of earth. But light does have inertia that causes its velocity to be finite (see the paper on The Problem of Inertia.)
Einstein suggests that there is no such thing as absolute rest. The fact is that motion reduces with increase in inertia. Only a body with infinite inertia shall come close to absolute rest.
Einstein postulates, “… the same laws of electrodynamics and optics will be valid for all frames of reference for which the equations of mechanics hold good.” Equations of mechanics hold good for frames of reference in which velocities correspond to the inertia of matter. They are many such frames for a range of inertia. The only value of inertia that would relate to all of them would be the reference value of zero inertia.
Einstein postulates light to provide such a reference point. This works for material frames of reference because inertia of light is imperceptibly small in comparison. However, it is questionable if Einstein’s postulate would work for particles of inertia in the atomic range, because inertia of light cannot be ignored in that range.
Einstein also postulates, “… light is always propagated in empty space with a definite velocity c which is independent of the state of motion of the emitting body.” The velocity of light is constant because it is determined by an inertia that is constant in the relatively small range of the frequencies of visible light. This inertia is not influenced by the inertia of emitting material body. Therefore, the velocity of light is independent of the state of motion of the emitting body.
The “luminiferous ether” was assumed to be a material-like medium of light waves. The inertial frame with the above two postulates then replaces the idea of “luminiferous ether”.
The theory to be developed is based—like all electrodynamics—on the kinematics of the rigid body, since the assertions of any such theory have to do with the relationships between rigid bodies (systems of co-ordinates), clocks, and electromagnetic processes. Insufficient consideration of this circumstance lies at the root of the difficulties which the electrodynamics of moving bodies at present encounters.
Rigidity of body corresponds to the material level of inertia. The systems of co-ordinates for space-time are designed with that rigidity in mind. So they apply to material bodies. It is questionable that these rigid space-time coordinates would apply to electromagnetic processes that have a level of inertia many orders of magnitude less than the inertia of matter.
Einstein’s theory of relativity is based on the dichotomy of “inertia – no inertia”.
.
I. KINEMATICAL PART
§ 1. Definition of Simultaneity
Let us take a system of co-ordinates in which the equations of Newtonian mechanics hold good. In order to render our presentation more precise and to distinguish this system of co-ordinates verbally from others which will be introduced hereafter, we call it the “stationary system.”
If a material point is at rest relatively to this system of co-ordinates, its position can be defined relatively thereto by the employment of rigid standards of measurement and the methods of Euclidean geometry, and can be expressed in Cartesian co-ordinates.
Einstein defines a “stationary system” in which the equations of Newtonian mechanics hold good. The space-time coordinates of this system have the rigid characteristics of the inertia applied to matter.
If we wish to describe the motion of a material point, we give the values of its co-ordinates as functions of the time. Now we must bear carefully in mind that a mathematical description of this kind has no physical meaning unless we are quite clear as to what we understand by “time.” We have to take into account that all our judgments in which time plays a part are always judgments of simultaneous events. If, for instance, I say, “That train arrives here at 7 o’clock,” I mean something like this: “The pointing of the small hand of my watch to 7 and the arrival of the train are simultaneous events”.
To describe the motion of a material point we give the values of its coordinates as functions of “time”. To represent this motion mathematically, we must define “time” with the understanding of simultaneity of events.
It might appear possible to overcome all the difficulties attending the definition of “time” by substituting “the position of the small hand of my watch” for “time.” And in fact such a definition is satisfactory when we are concerned with defining a time exclusively for the place where the watch is located; but it is no longer satisfactory when we have to connect in time series of events occurring at different places, or—what comes to the same thing—to evaluate the times of events occurring at places remote from the watch.
The judgment of simultaneous events is possible only at the location of the event. Additional considerations are required to define simultaneity of events at different locations.
We might, of course, content ourselves with time values determined by an observer stationed together with the watch at the origin of the co-ordinates, and co-ordinating the corresponding positions of the hands with light signals, given out by every event to be timed, and reaching him through empty space. But this co-ordination has the disadvantage that it is not independent of the standpoint of the observer with the watch or clock, as we know from experience. We arrive at a much more practical determination along the following line of thought.
The “time-value” comes from the position of the hand of the watch that is moving at a constant rate. The position of hands of watches at two different locations would have to be coordinated to achieve simultaneity. The communication between the two locations can be made through light signals.
If at the point A of space there is a clock, an observer at A can determine the time values of events in the immediate proximity of A by finding the positions of the hands which are simultaneous with these events. If there is at the point B of space another clock in all respects resembling the one at A, it is possible for an observer at B to determine the time values of events in the immediate neighbourhood of B. But it is not possible without further assumption to compare, in respect of time, an event at A with an event at B. We have so far defined only an “A time” and a “B time.” We have not defined a common “time” for A and B, for the latter cannot be defined at all unless we establish by definition that the “time” required by light to travel from A to B equals the “time” it requires to travel from B to A. Let a ray of light start at the “A time” tA from A towards B, let it at the “B time” tB. be reflected at B in the direction of A, and arrive again at A at the “A time” t’A.
In accordance with definition the two clocks synchronize if tB – tA = t’A – tB.
Simultaneity of clocks between two locations requires that light takes the same “time” of travel between the two locations in either direction.
We assume that this definition of synchronism is free from contradictions, and possible for any number of points; and that the following relations are universally valid:—
If the clock at B synchronizes with the clock at A, the clock at A synchronizes with the clock at B.
If the clock at A synchronizes with the clock at B and also with the clock at C, the clocks at B and C also synchronize with each other.
Thus with the help of certain imaginary physical experiments we have settled what is to be understood by synchronous stationary clocks located at different places, and have evidently obtained a definition of “simultaneous,” or “synchronous,” and of “time.” The “time” of an event is that which is given simultaneously with the event by a stationary clock located at the place of the event, this clock being synchronous, and indeed synchronous for all time determinations, with a specified stationary clock.
In agreement with experience we further assume the quantity 2AB/( t’A – tA) = c to be a universal constant—the velocity of light in empty space.
Einstein is assuming that light provides the fastest means of coordination to ascertain simultaneity of mechanical events. This is probably the case when mechanical systems are used for detection.
But for reasonable synchronization of clocks only a synchronization of tempo is needed. The rest is taken care of by the knowledge of distance between the two locations and the speed of light.
It is essential to have time defined by means of stationary clocks in the stationary system, and the time now defined being appropriate to the stationary system we call it “the time of the stationary system.”
The above concept of “time” may be understood in the following two ways:
We take the velocity of light as our reference point. This velocity is so large that compared to it the differences in velocities of material objects are negligible. This allows us a constant rate of change (tempo) with which to measure the motion of material bodies.
We take the inertia of light as our reference point. It is so small that we can treat it as the “zero” for the range of inertia for material bodies. This allows us a basis from which to measure the inertia, and therefore, the motion of all material bodies.
.
§ 2. On the Relativity of Lengths and Times
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
The theory of relativity stipulates that the laws by which the states of physical systems undergo change are not affected by translatory motion of frames of reference. This stipulation applies to material systems only, and not to rest of the physical systems covered in The Spectrum of Substance.
The theory of relativity stipulates the velocity of light ‘c’ to be a universal constant. This is true only for the range of frequencies that describe visible light. It is not certain that ‘c’ would apply to the whole range of frequencies on The Spectrum of Substancebecause ‘c’ represents the “drift velocity” that varies with inertia of the substance.
In this section Einstein develops his mathematical model to determine the relationship between two systems of coordinates that are moving at a uniform velocity relative to each other. In both coordinate systems the velocity of light ‘c’ is assumed to be the same. Einstein did not know that this relationship was already calculated by Lorentz earlier.
.
§ 3. Theory of the Transformation of Co-ordinates and Times from a Stationary System to another System in Uniform Motion of Translation Relatively to the Former
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
This section is purely mathematical. It derives the relationship between two co-ordinate systems that are moving uniformly relative to each other when the principle of relativity is applied. According to this principle, the velocity of light is constant in both stationary and moving frames of reference.
The mathematical stipulations are as follows:
Both “stationary” and “moving” frames of references are rigid like matter. They are homogenous throughout. In other words, the units of space and time maintain the same characteristics throughout.
The moving frame moves at a uniform velocity in the same direction.
Simultaneity of clocks at the two ends of a distance requires that light takes the same “time” of travel between the two locations in either direction.
The velocity of the moving frame is negligibly small compared to the speed of light.
Einstein then comes up with the same relationship that Lorentz had come up earlier.
Lorentz used the following assumptions:
The speed of light is the same in all inertial systems.
The gamma “fudge” factor is the same for all inertial systems.
The above assumptions are good for a “v/c ratio” of 1/10,000 or less. This is the ratio of the velocity of earth to the velocity of light.
.
§ 4. Physical Meaning of the Equations Obtained in Respect to Moving Rigid Bodies and Moving Clocks
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
The equations obtained above predict that length and time shrink with motion. But it is not stated how a velocity is introduced to the moving frame. In reality, velocity can be introduced only through acceleration, which then increases the inertia of the system. This is similar to the observation that wavelength and period of an electromagnetic wave shrink with frequency with resulting increase in inertia.
Force must be applied to generate acceleration or a frequency gradient. The application of force raises the inertia of the system to a new level. Thus, Einstein’s exercise with the “principle of relativity” indirectly supports a continuum of inertia. This continuum has been presented as The Spectrum of Substance. Here substance is primarily represented as an electromagnetic field. With decreasing inertia, substance regresses back to emptiness. With increasing inertia, substance advances towards matter.
Einstein’s own interpretations of the relativity of time have raised many interesting speculations, such as, “time travel”. But such interpretations assume that the principle of relativity works without limitation. This is not so. The workability of the principle of relativity is limited to the upper band of matter in The Spectrum of Substance, where the drift velocities are very low compared to the velocity of light, and any influence on length and time is infinitesimal.
.
§ 5. The Composition of Velocities
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
Einstein’s theory assumes that inertia of light is zero, because only then can light be treated the same in all inertial frames of reference. In other word, Einstein’s theory implicitly assumes the velocity of light to be infinite.
In reality, light has a very small amount of inertia as evidenced by a very large, but finite, velocity (see The Problem of Inertia). This inertia may be ignored because Einstein’s frames of reference are limited to matter, but we cannot ignore the implicit assumption of “infinite velocity” for light when dealing with composition of velocities.
Therefore, the following conclusions of Einstein are correct only when ‘c’ is infinite.
“It follows from this equation that from a composition of two velocities which are less than c, there always results a velocity less than c.”
“It follows, further, that the velocity of light c cannot be altered by composition with a velocity less than that of light.”
These conclusions are incorrect when ‘c’ is given a finite value. Thus, we see that math can be fallible when the assumptions are ignored.
.
II. ELECTRODYNAMICAL PART
§ 6. Transformation of the Maxwell-Hertz Equations for Empty Space. On the Nature of the Electromotive Forces Occurring in a Magnetic Field During Motion
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
Einstein uses his theory to modify the explanation of forces that are acting on an electric charge, which is moving in a magnetic field. This helps explain the asymmetry observed in the relative motion between a magnet and a conductor mentioned at the beginning of this paper.
We need to reexamine this explanation in the light of the understanding that “empty space” is essentially an electromagnetic field (see The Problem of “Empty Space”).
.
§ 7. Theory of Doppler’s Principle and of Aberration
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
From the mathematics in this section Einstein concludes that to an observer approaching a source of light with the velocity c, this source of light must appear of infinite intensity.
In this case the conclusion might be correct because the applicable assumption that inertia of light is negligible compared to the inertia of the source of light is valid.
.
§ 8. Transformation of the Energy of Light Rays. Theory of the Pressure of Radiation Exerted on Perfect Reflectors
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
Einstein concludes, “It is remarkable that the energy and the frequency of a light complex vary with the state of motion of the observer in accordance with the same law.”
That means we have a relationship between frequencies of a substance, which represent inertia in some way, and its ‘drift velocity’. See The Problem of Inertia. It may be possible to work out these relationships mathematically.
The weakness of Einstein’s theory is that it assumes the inertia of light to be zero. Once this is corrected, we may be able to achieve some groundbreaking result.
.
§ 9. Transformation of the Maxwell-Hertz Equations when Convection-Currents are Taken into Account
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
We don’t really know the exact nature of charge. It could result from the misalignment of frequency gradients in the electromagnetic field, but this needs to be researched further.
.
§ 10. Dynamics of the Slowly Accelerated Electron
[Please refer this section in the original paper. I am only writing my comments on the contents of this section here.]
It is not certain if Newton’s laws of force can apply to an electron, which is a particle just forming out of electromagnetic field. The nature of electron appears to be more like a whirlpool in an electromagnetic field. It’s inertia is not comparable to the inertia of a material point.
Einstein’s analysis of the motion of electron is, therefore, inconclusive.
Einstein regarded space as a physical reality for the following reason. From Einstein’s essay, Relativity & Problem of Space[1]:
But in this [Newton’s] theory, acceleration can only denote “acceleration with respect to space”. Newton’s space must thus be thought of as “at rest”, or at least as “unaccelerated”, in order that one can consider the acceleration, which appears in the law of motion, as being a magnitude with any meaning.
In Newton’s theory, acceleration is a motion relative to the object itself and not to other objects in space. On a smoothly flying plane, we do not feel the velocity, but the moment there is acceleration we feel it instantly in our bones. The idea of acceleration is tied closely with the concept of inertia, which is the property of all substance.
Newton defined inertia in his book “Philosophiæ Naturalis Principia Mathematica”as follows:
The vis insita, or innate force of matter, is a power of resisting by which every body, as much as in it lies, endeavors to preserve its present state, whether it be of rest or of moving uniformly forward in a straight line.
In the cosmic background all bodies have some “uniform motion” or a drift velocity. This velocity shall be small for stars of very large inertial mass because the larger is the inertial mass the more force it takes to move it. On the same account, the drift velocity for bodies of small inertial mass shall be large. Theoretically, a body with infinite inertia may have zero velocity; and a body with zero inertia may have infinite velocity. A finite drift velocity of a body shall mean that it has finite inertia. This shall apply to all substances whether matter or field.
.
Light
Though light has a very large speed in the cosmic background, it is not infinite. Michelson-Morley’s experiment determined this speed quite accurately, but it was unable to detect any inertia for light. However, the large but finite velocity of light means that it must have finite inertia. This inertia maybe infinitesimally small but it is not zero.
Light is made up of electromagnetic cycles. Each cycle consists of dynamic interchange between electrical and magnetic fields. But there is innate resistance to the formation of these fields. The inertia of light comes from such resistance to its cycles. Permittivity (ε0) is the measure of resistance that is encountered when forming an electric field in emptiness. Permeability (μ0) is a measure of how easily a magnetic field can pass through emptiness. Therefore, the resistance to the formation of an electromagnetic cycle is (μ0ε0). This may provide a measure of inertia for light.
The relationship between this inertia and the speed of light is,
c = 1/√(μ0ε0)
We may say that the speed of light is inversely proportional to the square root of its inertia.
.
The Lorentz Transformation
In physics, the Lorentz transformations are coordinate transformations between two coordinate frames that move at constant velocity relative to each other. Historically, the transformations were the result of attempts by the Dutch physicist Hendrik Lorentz and others to explain how the speed of light was observed to be independent of the reference frame.
The derivation of Lorentz transformation assumes the following.
Assumption #1: The speed of light is the same in all inertial systems.
Based on Michelson-Morley’s experiment, the speed of light of 3 x 108 meters/second was not affected by the velocity of the earth, which is 3 x 104 meters/second relative to the sun. The “v/cratios” in this case is 1/10,000, which is of the same order of magnitude as most material bodies in the universe. Therefore, this assumption is good for a “v/cratio” of 1/10,000 or less.
Assumption #2: The gamma “fudge” factor is the same for observers in different inertial systems.
In this cosmos, each body is drifting in space under a balance of inertial forces. These drift speeds are as different as their respective inertia. This may influence the gamma factor. But this difference may not be significant for a “v/cratio” of 1/10,000 or less.
.
Special Theory of Relativity
The special theory visualizes inertial systems to be boundless inertial “spaces” that move rigidly relative to each other. These inertial systems are equivalent for the formulation of natural laws. In other words, the natural laws are invariant with respect to the transition from one inertial system to another.
The special theory further assumes that the speed of light is a natural law. It is, therefore, invariant with respect to the transition from one inertial system to another. This allows the Lorentz transformations to be used in the special theory. According to Einstein,
The whole content of the special theory of relativity is included in the postulate: The laws of Nature are invariant with respect to the Lorentz transformations. The important thing of this requirement lies in the fact that it limits the possible natural laws in a definite manner.
The Lorentz transformations have been successful in explaining the “aberration” of the fixed stars in consequence of the annual motion of the earth; and the “Doppler effect”, i.e. the influence of the relative motion of stars on the frequency of the light. This success depends on the “v/c” ratio being within the limits of assumption of the Lorentz transformation in these cases. In other words, the validity of Lorentz transformations depends on the inertia of light being negligible compared to the inertia of matter.
Thus, the special theory produces valid results as long as the inertia of light is negligible compared to the inertia of the system under consideration.
.
The Atomic Systems
The atomic systems have inertia comparable to the inertia of light. Therefore, when it comes to the application of special theory to systems of atomic dimensions, the inertia of light can no longer be considered negligible. So, the special theory of relativity does not produce valid results in such cases.
The success of the theory of relativity can be assured across the board only by reformulating it with a reference point of zero inertia instead of the velocity of light.
Such a reference point is provided by the concept of emptiness.
.
The disturbance theory postulates that the continuum of substance from emptiness to matter is formed by field. The field is not invisible. It appears to us as “empty space”. A vacuum is not entirely empty even when there are no atoms and molecules of matter. There is still field in that vacuum because its extension is manifested as space.
Substance is made up of field and matter. Field is back and forth interchanges of electric and magnetic energy like the interchanges of kinetic and potential energy in a pendulum. Matter is the “condensed” form of field.
The field has a frequency structure. That frequency structure is maintained when a disturbance propagates through the field. Therefore, there is inertia at the level of the field also. There are disturbances in the field of numerous frequencies that may be plotted on a scale. Thus there is a broad spectrum of frequencies of which the known electromagnetic spectrum is a part This also provides us with a spectrum of inertia.
The field is continuous throughout; but a disturbance in it has frequency cycles that are quantized. In other words, the frequency cycles can be counted. Only complete frequency cycles participate in any interaction. Therefore, all interactions in the field are quantized. Emission and absorption of such cycles as a group during interactions produces the concept of quanta.
As frequency increases the structure of disturbance becomes denser. Within the field there is continuous gradient among disturbances of different frequencies. The frequency gradient comprises force, which is balanced by rotary motion in the field. Thus there are vortices in which frequency increases rapidly toward the center. This leads to increasingly denser structure of disturbance toward the center of a vortex. This gives us the particles of quantum mechanics.
When the frequency gradient is not balanced by the rotary motion, there is an imbalance of forces. This imbalance appears as “charge”. When the gradient is overcompensated by the rotary motion the charge appears as “negative”. When the gradient is undercompensated by the rotary motion, the charge appears as “positive”. An electron is such a vortex particle within the field that has negative charge at its surface. The condensing field within the electron appears as the beginning of mass.
Beyond a certain threshold, the frequency structure of disturbance collapses into solid mass. This occurs at the center of the vortex. A proton is a vortex particle of a much higher frequency. In a proton the frequency structure at the center has collapsed into solid mass. It also has an unbalanced frequency gradient at its surface that appears as positive charge. A neutron, on the other hand, is very similar to the proton in terms of mass, but its frequency gradient is matched by its rotary motion resulting in no charge.
The disturbance theory postulates that atoms are much larger and complex vortices in the electromagnetic field. The frequency gradients within an atom are mostly balanced by rotary motions and it is by and large neutral in terms of charge, except near its surface. This produces stable and discrete configurations that are neatly arranged as the periodic table.
An atomic configuration may range from negative to neutral to positive. An atom is a single vortex particle, but it is assumed to be made of electrons, protons and neutrons. This is because the mass of atomic configurations can be approximated as integer multiple of much heavier protons and neutrons; and because electrons, protons and neutrons are commonly observed during atomic interactions. But there are other quantum particles that have been observed during more energetic atomic level collisions. The Standard Model of particle physics has been derived from such observations.
The disturbance theory postulates that there are no discrete particles embedded within the atom, and that they are generated during atomic level interactions. Each and every quantum particle is a vortex in the field of different dimension. It either maintains a stable frequency structure or it decays back into the background field.